Wlx-893u3: Manual

If prompted to initialize the disk, choose (for drives larger than 2TB) or MBR (for older systems/smaller drives), then click OK.

To protect your data from corruption, never unplug the WLX-893U3 while the LED light is flashing, which indicates active data transfer.

Memory cards can be hot-swapped. Insert an SD or CF card, and the computer will mount it as a removable flash drive. Wlx-893u3 Manual

Up to 10TB+ (depending on firmware version and OS formatting) Power Supply: Input: AC 100-240V; Output: DC 12V/2A

| Parameter | Value | |-----------|-------| | Interface | USB 3.0 (5 Gbps max) | | Supported drive types | 2.5" or 3.5" SATA HDD/SSD | | Max capacity | Up to 16TB (tested) | | UASP support | Yes | | Power (3.5" model) | 12V DC, 2A adapter included | | Power (2.5" model) | 5V via USB (bus-powered) | | OS support | Windows, macOS, Linux, Chrome OS, Android (OTG) | | Dimensions | Approx. 190 x 115 x 35 mm | | Material | ABS plastic or aluminum (check your version) | If prompted to initialize the disk, choose (for

Mechanical hard drives (HDDs) have spinning parts. Moving the drive while it is operating can cause permanent physical damage and data loss.

However, the device may be sold under different brand names (WLX, PALMEXX, DIGITALS, etc.), and these sellers may occasionally provide a driver CD. If you receive one, it is often for legacy operating systems like Windows 98/ME. Insert an SD or CF card, and the

If you insert a brand-new, unformatted hard drive, it will not appear under your file browser. You must initialize it: