Navigating via the control panel screen, select a manual testing cycle.
Check the main power switch at the base/wall mount, and ensure the main power supply is active.
Lift the spring-loaded wall arm and drop the pivot pin into the wall bracket sleeve. Ensure the plastic bush bearings are in place to prevent metal-on-metal grinding. wella climazon millenium manual install
Ensure the main ON/OFF switch (8) is accessible and the plug (b) is correctly seated in the wall outlet.
Once physically installed, you must calibrate the unit according to the . Navigating via the control panel screen, select a
For wall installations, the Acrobat 2004 manual outlines critical safety measures:
Fix the spring arm to the top of the stand pipe. Ensure the plastic bush bearings are in place
By following these installation steps diligently, you ensure the Wella Climazon Millennium Go to product viewer dialog for this item.
Adjust the internal arm tension. If the arm drifts or droops on its own, tighten the internal tension nut located at the elbow joint using an adjustable wrench. Step 4.4: Wire and Attach the Head
