Consider this your companion to the official manual—written by users, for users.
(Prevents motor overheating due to low voltage drops) A7 Under-Voltage Recovery Voltage 145V – 215V 195V – 200V A8 Under-Voltage Action Time 0.1s – 30s 0.5 seconds 0.5 seconds A9 Under-Voltage Recovery Delay 1s – 500s 30 seconds 30 seconds A10 Over-Current Cutoff Value 1A – 63A (based on model) 40A or 63A
: Before powering on, verify that your total load does not exceed the set protective current to avoid frequent tripping or damage. tomzn tovpd160ec manual better
The Tomzn TOVPD160EC is a solid, affordable timer once you understand its logic. Bookmark this guide, set your clock first, always verify you’re in AUTO mode, and you’ll be fine.
If the device reads slightly higher or lower than a known accurate multimeter, use the calibration mode to adjust the voltage reading Bookmark this guide, set your clock first, always
| Specification | Value | | :--- | :--- | | | 230V AC, 50/60Hz | | Current Range | Adjustable (1–63A typical, with some models supporting up to 80A or 100A) | | Overvoltage Trip Range | Adjustable (typically 230–300V, default 270V) | | Undervoltage Trip Range | Adjustable (typically 140–210V, default 170V) | | Trip Time Delay | Adjustable 0.1–30 seconds (default 0.5s) | | Recovery Delay | Adjustable 1–500 seconds | | Installation | Standard 35mm DIN rail | | Power Consumption | <2W | | Operating Temperature | -20°C to +55°C |
: The first button can manually toggle the load. When off, the lower display shows "oFF". 2. Core Parameter Settings (A1–A14) the lower display shows "oFF".
The first button (Power) can manually switch the load on or off. When off, the lower display shows "oFF".
Users can define how long the device waits before reconnecting power after a fault, typically ranging from 1 to 500 seconds. Programming and Operation According to the TOVPD1-60-EC configuration guidelines