The firmware being flashed belongs to a different model number, carrier, or region.
A loose cable, a bad USB port, or a USB 3.0 compatibility issue interrupts data transfer mid-stream.
If you have applied the correct PIT file, swapped cables, used a full 4-file firmware pack, and Odin still fails at the exact same "re-partition" step, your device likely has a . re-partition operation failed. odin
Click Start to format the partitions and install the firmware. 4. Switch to a Different Version of Odin
The following is a reconstructed timeline based on the system logs retrieved from the buffer moments before the crash: The firmware being flashed belongs to a different
: In the worst-case scenario, the internal flash memory (eMMC or UFS chip) has degraded or failed, becoming read-only. 📋 Step-by-Step Troubleshooting Workflow
means: Odin attempted to rewrite or realign the device’s partition table using a PIT file, but the operation was rejected or timed out by the phone’s bootloader. Click Start to format the partitions and install
You must obtain the correct .pit file for your exact model and region. In Odin, go to the PIT tab , upload the file, and ensure "Re-Partition" is checked this time.
: Faulty USB cables, loose USB computer ports, or missing Samsung USB drivers drop packets mid-transfer, breaking communication during vital data writing cycles.
If you want, tell me the exact device model, the Odin version, the firmware package name, and paste the Odin log text (copy the message box) and I’ll give concise next steps.