Copy the linear_start_addr from your text file and paste it into the field.
Because you already bypassed security in Step 1, SP Flash Tool will instantly begin processing. A red progress bar will appear, followed by a yellow bar showing data transfer speeds.
[Release] New MT6761 (Helio A22) Scatter File – Optimized for SP Flash Tool If you are working with a device powered by the MediaTek MT6761 (Helio A22)
Click the button (green arrow) at the top of SP Flash Tool. mt6761 scatter file new
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | | Incorrect preloader or scatter file mismatch. | Force device into BROM mode (short test points) or reinstall drivers and retry. | | "Status_BROM_CMD_SEND_DA_FAIL" | USB driver conflict (often on Windows 10/11). | Disable Driver Signature Verification, reinstall MediaTek VCOM drivers, and try another USB port. | | SP Flash Tool doesn't detect phone | Phone not in Download Mode or driver not loaded. | Power off fully, wait 10 seconds, hold Volume Up, then connect USB. Test different USB 2.0 ports. | | "PMT Changed for the ROM" | Partition layout mismatch between scatter file and device. | Use "Format All + Download" (warning: this will wipe NVRAM and IMEI). Use only if you have a full NVRAM backup. | | Bootloop after flashing | Incorrect system.img or incomplete flash. | Re-flash the full stock ROM using "Download Only" or clear userdata via recovery. | | "S_FT_ENABLE_DRAM_FAIL" | Preloader file corrupted or region mismatch. | Verify the preloader partition is checked in SP Flash Tool and matches your specific device model. |
There are two primary methods to acquire a clean, functional scatter file for your phone.
Is your phone currently or stuck looping on a logo? Copy the linear_start_addr from your text file and
Avoid "Format All + Download" unless absolutely necessary, as it erases your device's unique IMEI and calibration data (NVRAM). Click the Download button at the top.
These allow your PC to recognize the device when connected in "BROM" or "Preloader" mode (device turned completely off).
Keep your device charged to at least 50% to prevent interruption during the flash. Do you need specific download links for the MT6761 drivers or a compatible version of SP Flash Tool [Release] New MT6761 (Helio A22) Scatter File –
Disconnect your phone from the bypass tool, turn it off, run the bypass again, and link it up.
Flashing a MediaTek device carries inherent risks. Gather these tools and prepare your PC before proceeding. 1. Hardware Requirements A functional Windows PC (Windows 10 or 11 preferred).
With a valid scatter file in hand, you unlock the full potential of the Helio A22—from repartitioning for GSI treble builds to fully recovering a hard-bricked device. Always double-check your addresses, and happy modding.