Kincaid Radio Controlled Clock Instruction Manual Jun 2026

: The hands will often spin and stop at 4:00, 8:00, or 12:00 while the clock searches for a signal. Select Time Zone

: Forces the clock to immediately search for the WWVB radio tower signal. Pressing and holding this for 3 to 5 seconds triggers a manual search cycle.

Use the switch or buttons on the back to select your local time zone (e.g., PT, MT, CT, ET).

Once a day (usually at night when atmospheric interference is lowest), the clock searches for this radio signal. It then automatically adjusts the hands or digital display to match the exact atomic time, accounting for Daylight Saving Time (DST) changes. Initial Setup Instructions kincaid radio controlled clock instruction manual

Is your Kincaid clock displaying the wrong time, or have the hands stopped moving entirely? Radio signals can be finicky. Use this troubleshooting matrix to fix the issue. Issue 1: The clock is exactly 1, 2, or 3 hours off.

When you first receive your Kincaid clock, follow these steps to initiate the atomic time signal search. Step 1: Install the Battery

The clock requires a clear path to the Colorado radio tower. : The hands will often spin and stop

A small, recessed pinhole button. Pressing this with a paperclip clears the internal memory and restarts the clock from its factory default state. Use this if the clock freezes or behaves erratically.

The clock will stop normal timekeeping and begin searching for the radio signal.

Replace the battery with a brand new alkaline battery. If it still sits at 12:00, it means it is struggling to find the radio signal. Move the clock to a window facing Colorado overnight. Issue 3: The clock does not update or keeps losing time. Use the switch or buttons on the back

Insert fresh, high-quality alkaline batteries according to the polarity markings ( + and - ).

Use a paperclip or a toothpick to gently press the button inside the hole for 2 seconds.

If you bought the clock as a gift or live in a radio dead zone (e.g., basement, metal building, high-EMF area), you can set the time manually. The clock will still try to sync overnight.

In North America, this signal is WWVB , broadcast by the National Institute of Standards and Technology (NIST) from Fort Collins, Colorado. In Europe, it typically syncs with the DCF77 signal in Germany or MSF in the UK.