Kes Geyser Load Control Timer Manual New _best_ Jun 2026

Once power is restored, the green LED should indicate mains power status, and a flashing blue LED indicates the active program. Programming & Modes

: Always ensure the mains power is switched off before attempting any internal wiring. Geyser Load Control Timer ISG1201 Guide | PDF - Scribd

Release the button. Your current system time is now set. Step 3: Setting the On/Off Schedules

Here are some solutions to common problems you might encounter with your KES timer: kes geyser load control timer manual new

4. The Timer Loses Its Program Settings During Power Cuts / Load Shedding

Do you need assistance figuring out how to set up ?

Clears all internal memory, including the current time and all programmed schedules. Once power is restored, the green LED should

Electrical work can be dangerous. Follow these safety protocols strictly:

Verify the primary current clock setting. Review your programs by pressing P step-by-step and double-checking that both the ON and OFF modes share identical day groupings (e.g., if ON is set to Monday-Friday, OFF must also be Monday-Friday). 3. The Timer Clicks but the Water Remains Cold

This comprehensive manual provides step-by-step instructions for installing, programming, and troubleshooting your new KES Geyser Load Control Timer. Technical Specifications Your current system time is now set

The override typically lasts for one hour (or until the next programmed event).

: Most restrictive; OFF for most of the day (00:00–03:00, 08:00–15:00, 20:00–24:00) and during peak times. It includes a short weekend "ON" window from 11:00 to 13:00.

Built-in rechargeable Ni-MH battery (retains memory for up to 150 hours during power outages) Time Increments: 1-minute intervals