: If after the update your screen content is shifted to the left , you have likely installed the wrong firmware version for your specific hardware. Your device likely requires the "Version B" update. Simply repeat the process with the correct file.
Drag and drop the downloaded .bin firmware file directly into the root directory of this drive. Safely eject the USB drive from Windows. Method B: Flash Tool Software
: Delete any existing files on the oscilloscope's drive and copy the new FSI-1014.bin file onto it.
Are you using a computer to transfer the files? fnirsi1014d firmware update work
Plug the oscilloscope into a reliable power outlet. Do not update during an electrical storm or if your local power grid is fluctuating.
: There are two variants of Version 3.0 firmware because FNIRSI used two different screen types during production. If your display appears shifted or parameters are cut off after an update, you must re-flash with the alternate Version 3.0 file.
: Use a USB-A to USB-A cable to connect the oscilloscope to your computer. : If after the update your screen content
Select the downloaded .bin firmware file within the software interface.
A standard USB data cable is required. Note that some users describe this as an "A to A" cable. Target Drive:
: Turn the device back ON . You should see the startup screen followed by a horizontal progress bar. This usually takes about 20 seconds to complete, after which the device will automatically reboot. Critical Issue: The "Shifted Screen" Bug Drag and drop the downloaded
Are you experiencing a you hope this update fixes?
Swap the USB port. Avoid USB 3.0 (blue ports) if you encounter glitches; older USB 2.0 ports are significantly more reliable for flashing legacy microcontrollers.
: Power on your FNirsi-1014D and ensure it's recognized by your computer.
: Connect your oscilloscope to a computer using a standard USB data cable.