Dual Imei Mtk Write Imei Tool V11 Full [verified]

Launch SN_Writer.exe and click on System Config . In the "Write Option" section, tick the IMEI checkbox. If you have a dual SIM phone, tick the Dual IMEI checkbox. Under "Database File Option," load the AP_DB (Application Database) and MD1_DB (Modem Database) files, which are located in your device’s stock firmware folder.

Carefully type your device's 15-digit IMEI numbers into their respective slots.

Extract the contents to an accessible directory (e.g., C:\MTK_IMEI_Tool\ ).

Ensure the settings match your phone (usually default settings work). Step 4: Connect the Phone Turn off your MTK device completely. Connect it to your PC using the USB cable. Step 5: Write IMEI dual imei mtk write imei tool v11 full

Ensure the BPLGUInfo file precisely matches your chip generation. Do not use database files from different phone models.

Open Windows Device Manager. Check for unrecognized devices with a yellow exclamation mark. Reinstall the MediaTek USB VCOM drivers, reboot your PC, and use a different USB port (preferably a USB 2.0 port on the back of the motherboard). 2. "Meta Mode Initialization Failed" Error

While the SN Write Tool is the most common solution for computers, several other tools exist, many of which are referenced in the full "toolkit" packages: Launch SN_Writer

Practical uses

Simultaneously writes both IMEI 1 and IMEI 2 for dual-SIM MediaTek devices in a single execution loop.

It is critical to distinguish between and IMEI Changing . Under "Database File Option," load the AP_DB (Application

The tool automatically detects the connected MTK device once drivers are installed.

Before initiating the IMEI writing process, ensure your environment meets the following conditions to avoid soft-bricking the target hardware: