Delphi-autocom - Cdp- 2017.r3 On Win10 - Mhh Auto - Page 1

Restart Win10 in "Disable Driver Signature Enforcement" mode and reinstall drivers. Wrong firmware version or faulty dual-board clone hardware.

: Run the keygen tool, load your FileActivation.xml , click Activate/Generate , and save the newly modified FileActivation.xml file.

Click and save it to your desktop.

Connect the other end to a vehicle's OBD2 port (the device needs 12V vehicle power to flash properly).

Ensure the drivers were installed from the installation folder, not Windows Update. Delphi-Autocom CDP- 2017.R3 on Win10 - MHH AUTO - Page 1

The Delphi framework relies on older Microsoft libraries. Ensure both versions are enabled via the "Turn Windows features on or off" menu.

For the most up-to-date patches and community help, users typically refer to the MHH AUTO forums to ensure they are using a legitimate patched file. Restart Win10 in "Disable Driver Signature Enforcement" mode

Scroll down to find the unrecognized entry (often appearing with a yellow exclamation mark under or Universal Serial Bus controllers as "Autocom device" or "Unknown Device"). Right-click the item and select Update driver . Choose Browse my computer for drivers .

The software will ask to save a file named . Save it to an easily accessible location like your Desktop. Click and save it to your desktop

If you are running into specific errors during your setup, let me know: What or behavior are you currently seeing? Is your CDP+ hardware a single-board or dual-board clone?

Click on in the top navigation menu, then choose Hardware Configuration . Set your connection type to USB/BT .