Ensure the steering wheel remains locked in the straight-ahead position while adjusting front toe. 5. Calibration and Maintenance Procedures
Mount the calibration bar on a level surface in front of the alignment bay.
Finalize the adjustment process by setting the to ensure a perfectly straight steering wheel. 4. Calibration & Maintenance Procedures
The system will measure the cross-talk between the infrared diodes. If the values fall outside standard tolerances (typically ±0.05°), select and follow the automated step-by-step wizard. Daily Maintenance Checklist corghi exact 60 manual
Lock the sensor heads onto the clamps using the quick-release knobs. 🚗 Step-by-Step Operation Guide
Mount the four sensor heads onto the central console storage brackets to charge (if using wireless models).
Are you working with the or wireless (radio) version of the Exact 60? Ensure the steering wheel remains locked in the
Plug the main power cord into a grounded electrical outlet equipped with a surge protector. Sensor Head Connection (Cable Version)
Place the central console at least 2 to 3 meters away from the front turn plates. Ensure it does not block the line of sight between the front and rear sensor heads.
: Automated steps for measuring caster, kingpin inclination, and toe-out on turns. Finalize the adjustment process by setting the to
Inspect the sensor charging pins for debris, corrosion, or bending.
Ensure the lift is locked on its safety racks; re-check suspension parts. Software corruption or missing security dongle.