!!exclusive!! | Chipblaster Jv10 Manual

High-pitched whining typically points to air trapped inside the filter housings or pump cavitation. Perform the full air purge sequence to clear the line.

Connect the transfer line from the CNC machine tool sump to the filter unit's inlet.

Proper physical placement and electrical integration prevent premature component failure and ensure safe operation. Mechanical Installation chipblaster jv10 manual

ChipBLASTER JV10 (often referred to as part of the JV-series) is a high-pressure, high-volume coolant delivery system designed to enhance the performance of CNC mills and lathes. It is engineered to deliver precise coolant flow directly through the spindle to improve chip management and tool life Revelation Machinery Core Technical Specifications Specification Maximum Pressure 1,500 PSIG (103.4 BAR) Coolant Volume 10 Gallons Per Minute (37.8 LPM) Tank Capacity 48 Gallons Motor Power Electrical System 460V / 3 Phase / 60Hz Dimensions 35" Depth x 55" Width Critical Safety & Installation Flammability Warning

Switch the main breaker disconnect on the JV10 electrical cabinet to the position. High-pitched whining typically points to air trapped inside

Trapped air causes severe pump cavitation and pressure fluctuations. Follow this manual sequence on the initial start or after changing filter elements:

Allows users to manually change or dead-head the pump to dial in exact pressure output without exceeding maximum limitations. Installation & System Set-Up Trapped air causes severe pump cavitation and pressure

Open filter petcocks to bleed trapped air before full operation. Operation and HMI Features