Audio Choice Qm4 Manual -

A: Yes. However, the manual notes that charging while playing at maximum volume may increase heat. If the device gets uncomfortably warm, pause playback until it cools.

This article serves as a comprehensive guide, functioning as an extended , covering setup, features, operational tips, and troubleshooting. 1. Introduction to the Audio Choice QM4

Controls the overall depth of the reverb effect applied to the mix. 3. Rear Panel Connections and Features audio choice qm4 manual

The system is built for portability with rugged construction and integrated handles. Dimensions (H x W x D) QM4 Mixer Head 6" x 18.5" x 11.5" C100 Speaker (Each) 19.5" x 14" x 11" Operational Highlights Spring Reverb

Sing or play into the active channel while gradually turning up that channel's volume knob to about 50%. Slowly bring up the Master Volume until you reach the desired sound output level. Operational Tips and Best Practices QM4 AND QS4 Instruction Manual - TDK Product Center A: Yes

A: Phantom power is not documented as a standard feature. If you are using a condenser microphone that requires phantom power, you will need to provide it with an external source.

: You must connect passive (unpowered) PA speakers (such as the compatible AudioChoice C100 units). Never connect active/powered speakers to the speaker outputs, as doing so will instantly destroy their built-in amplifiers. This article serves as a comprehensive guide, functioning

: While testing a microphone or instrument, slowly turn up that channel’s Gain control until your source sounds loud, crisp, and clear without any clipping.